cold mold
英 [kəʊld məʊld]
美 [koʊld moʊld]
冷（铸）型
双语例句
- Luck would have it that Fleming had decided not to store his culture in a warm incubator, and that London was then hit by a cold spell, giving the mold a chance to grow.
彷佛是幸运之神的眷顾，佛莱明决定不要把培养菌放在温暖的培养器中，然后冷峰侵袭了伦敦，给了霉菌生长的机会。 - By measuring the hydraulic forces of cylinders in cold and hot tests with different oscillation parameters, the friction forces between strand and mold were calculated.
通过检测不同振动参数下，冷态和拉坯时振动系统输出力的变化情况，计算出结晶器与铸坯间摩擦阻力。 - The Research on Method of the Accumulator Electrode Cold Extrusion and Simulation of Mold
蓄电池外电极冷挤压方法研究及模具结构模拟仿真 - The effect of high frequency electromagnetic field imposed on outside of a cold crucible mold on the quality of cast metal in hot experiment was studied.
在间歇式高频磁场作用下，通过高速数码摄像机观测并研究了熔融金属弯月面的形状及其波动行为，建立了保护渣浸入深度的理论计算模型。 - Oh, baby, without you, my soul is cold my heart will have died, and my blood is like mold.
亲爱的，没有你。我的心会死，血会凝固，灵魂会冰冷。 - Using the cold core and floating mold to solve the problem that the precision of auto rubber and plastic products is so hard to guaranteed.
采取冷芯浮模加工解决汽车橡塑零部件精度难以保证的问题。 - The Issue in the Process of Processing Cold Stamping Mold and Quality Control
冷冲压模具加工过程中的问题与质量控制 - The Study of the Cold Forging Mold Life and the Influencing to the Coarse Grained Organization Factors of the Gear
齿轮冷锻模具寿命和影响齿轮粗晶组织因素的研究 - Design of the Cold Stamping Mold of Pressure Vessel's End-plate
压力容器封头复合模具设计 - Cold Heading and Key Mold Design of Cup Head Square Neck Bolts
半圆头方颈螺栓的冷镦成形工艺及关键模具设计 - Healthy rat were divided into seven groups such as external dampness, cold-wetness, heat-wetness, cold, heat, normal and aseptic ( relatively aseptic) and so on in the environment makes mold for thirty day.
将健康大鼠分别在外湿、寒湿、湿热、寒冷、温热、正常及无菌（相对无菌）等环境中造模30天。 - Design and Research on Cold Extrusion Mold of the Gear Axis
齿轮轴冷挤压模具的设计与研究 - Simulated results show that obtained parts has few defects, such as inclusion and cold shut due to smooth mold filling and uniform distribution of temperature field.
模拟结果表明，该浇注系统填充过程平稳，温度场分布均匀，所得压铸件气体夹杂和冷隔缺陷少，整体质量较高。 - This paper introduces iron castings produced by high efficiency mechanized water cold copper alloy metal mold.
介绍了铸铁件水冷铜合金金属型机械化高效率铸造生产工艺； - 3-D Modeling for Cold Felting Mold Design in Lost Foam Casting
消失模冷粘结模具的三维造型与设计 - Preliminary Research of Mold Explosion for Water Cold Metal Mold Centrifugal Casting Iron Pipe Production
水冷金属型离心铸造球铁管用管模炸裂原因初探 - This paper mainly performs the design and mechanical analysis and research on cold extrusion mold of the gear axis in cars.
本文主要对汽车用齿轮轴的冷挤压模具进行了设计和力学分析研究。 - The results show that pouring in the cold shell mold has the advantage of preventing decarburization at the surface of both plain and low alloy carbon steels, and therefore the positive effect of increasing the surface hardness of castings.
试验表明：熔模精密铸造型壳采用冷型浇注，可防止碳钢及低合金钢铸件的表面的氧化脱碳，有利于提高铸件的表面硬度； - The magnetic field in electromagnetic casting is investigated by experiment on a cold model of caster and numerical calculation. Magnetic flux density distributes homogeneously in empty soft contact mold.
用自制线圈探头测定了电磁铸造单锭和双锭系统冷态模型的磁场分布规律，并用互感耦合模型对磁场进行了数值计算。空载结晶器内部的磁场分布比较均匀； - The manufacture process was improved from the first cold bonding-post curing to primary cure by using the mold having chevron cell, and the adhesion strength between the chevron type of pattern and the belt body was improved, and the conveyance capability was significantly increased.
制作工艺由起初的冷粘合二次硫化改进为在硫化机上加装人字花纹模具一次整体硫化，提高了花纹和带体间的粘合强度，明显地增加了输送带的输送量； - Due to the mold used in carrying aluminum ingots in the hot and cold working environment long time, because of the fatigue in the mold surface, which arises inevitably the crack, even rift.
由于承载铝锭的铸模长期处于冷热变化剧烈的工作环境，铸模壳体难免会因为疲劳而产生裂纹，甚至裂缝。 - The outstanding feature of the steel is soft after solution treatment ( i.e. quenching). The steel can be treated with cold processing and aging process after being made into mold, which can ensure keeping its performance and reducing heat deformation as well.
该钢突出的特点是固溶处理（即淬火）后变软，可进行冷加工，待制成模具后再进行时效处理，既保证其使用性能又减少热处理变形。 - Finally, cold mold experiments and conceptual design are carried out on a rotary kiln reactor, which is suitable for continous growth of CNFs.
最后对适用于CNFs连续合成的回转窑反应器进行了冷模实验研究和概念设计。 - So that the computer technology could provide an academic reference combined with mold design techniques for pressing products analysis and design. First, the paper elaborated on the principle of cold press mold design and the role and function of AutoForm software, UG software.
使计算机技术和模具设计技术相互结合与渗透，为冲压产品模具的分析和设计提供一个合理的理论依据。论文首先详细阐述了冷冲拉延模具设计原则、AutoForm软件、UG软件的作用和功能。